深水刚性跨接管设计分析Study on Design Analysis of Deepwater Rigid Jumper
孙国民;赵党;杨琥;李旭;胡春红;
摘要(Abstract):
跨接管广泛应用于较深水及深水海域油气资源的开发项目中,因其结构柔性和安装便捷性,是连接水下结构物的常用选择方案。本文主要依据我国正在开发的南海项目,介绍深水刚性跨接管设计过程中需要重点考虑和关注的技术难点,详细介绍了设计相关参数、壁厚选择、强度计算和疲劳评估等,本文得出的结论可供后续类似工程项目、科研课题等借鉴。
关键词(KeyWords): 跨接管;壁厚;结构强度;结构疲劳;段塞流
基金项目(Foundation): 国家工信部高技术船舶科研项目“水下油气生产系统工程化示范应用”课题一“水下油气生产系统示范应用工程总体设计技术研究”专题二“设计体系与标准体系研究”子任务“水下生产系统安装技术研究及安全完整性级别分析(SIL)通用技术研究”(编号:2019GXB01-01);; 工业和信息化部高技术船舶科研项目“水下多功能管汇工程化技术研究”经费资助(工信部装函[2018]472号)
作者(Author): 孙国民;赵党;杨琥;李旭;胡春红;
Email:
DOI:
参考文献(References):
- [1]ASME B31.8.Gas Transmission and Distribution Piping Systems[S].The American Society of Mechanical Engineers,2018.
- [2]ASME B31.4.Pipeline Transportation Systems for Liquids and Slurries[S].The American Society of Mechanical Engineers,2019.
- [3]DNVGL-ST-F101.Submarine Pipeline Systems[S].DNVGL AS,2017.
- [4]API RP 1111.Design,Construction,Operation and Maintenance of Offshore Hydrocarbon Pipelines(Limit State Design)[S].American Petroleum Institute,2015.
- [5]ANSYS Mechanical APDL User Manual,2017.
- [6]DNVGL-RP-C203.Fatigue Design of Offshore Steel Structures[S].DNV GL AS,2019.9.
- [7]DNVGL-RP-F105.Free Spanning Pipelines[S].DNV GLAS,2017.6.
- [8]User Guide for Shear Version 4.10b.
- [9]Heijden van der,Smienk H.Fatigue analysis of subsea jumpers due to slug flow[J].Proceedings of the ASME 201433rd International Conference on Ocean,Offshore and Arctic Engineering,2014.
- [10]Koska R,Lim K,Howells H.Defining Structural Monitoring Requirements for Slugging in Rigid Jumpers and Pipelines Spans.reports form 2H offshore company,2014.
- [11]白勇,白强.海洋工程设计手册-海底管道分册[M].上海:上海交通大学出版社,2014.
文章评论(Comment):
|
||||||||||||||||||
|