大型液化天然气船围护系统及其低温金属材料焊接技术Reviews of the Cargo Containment Systems of Large Scale LNG Carriers and the Welding of Related Low Temperature Metals
林文虎;华学明;吴毅雄;唐永生;张汇平;
摘要(Abstract):
液化天然气(LNG)船围护系统的材料选择影响液货舱的结构设计、安全性设计和成本设计,其中金属材料是与设计和制造过程关联程度最大的因素。讨论了围护系统的承力构件和保温层的组成结构,考虑在-196℃具有可行性的低温金属材料有Invar合金、304L不锈钢、Ni9钢和A5083铝合金。材料的导热性能影响隔热层设计和焊接冶金,强度影响板材厚度的设计,厚度则影响材料的成本、加工、搬运、安装和焊接。总结了4种金属材料的材料性能参数和焊接性。
关键词(KeyWords): 液化天然气船;低温金属材料;材料性能;焊接性
基金项目(Foundation): 工业和信息化部高技术船舶科研计划“新型液化天然气船液货围护系统预先研究项目”
作者(Author): 林文虎;华学明;吴毅雄;唐永生;张汇平;
Email:
DOI:
参考文献(References):
- [1]王永伟,王传荣,王晶.LNG船三种储罐系统比较分析[J].船舶物资与市场,2007(2):25.
- [2]李雨康.LNG船储罐保冷技术概述[J].上海造船,2002(2):45.
- [3]张则松,王言英.LNG运输船船型浅析[J].船舶工程,2003,25(4):25.
- [4]刘文华.中小型LNG船C型独立液货舱载荷分析[J].船舶与海洋工程,2012(2):1.
- [5]Park W S,Chun M S,Han M S,et al.Comparative study on mechanical behavior of low temperature application materials for ships and offshore structures.Part I.Experimental investigations[J].Materials Science and Engineering A,2011,528(18):5790.
- [6]Yoo C H,Kim K S,Choung J et al.An experimental study on behaviors of IMO Type B CCS materials at room and cryogenic temperatures[C].ASME 2011 30th International Conference on Ocean,Offshore and Arctic Engineering,2011:241.
- [7]张成俊.液化天然气贮藏舱用材料[J].上海钢研,1989(5):66.
- [8]Vinogradov A,Hashimoto S,Kopylov V I.Enhanced strength and fatigue life of ultra-fine grain Fe-36Ni invar alloy[J].Materials Science and Engineering A,2003,355(1):277.
- [9]Johan P,Guha B,Achar D R G.Fatigue life improvement of AISI 304Lcruciform welded joints by cryogenic treatment[J].Engineering Failure Analysis,2003,10(1):1.
- [10]程丽霞,陈异,蒋显全,等.液化天然气运输船及其储罐用材料的研究进展[J].材料导报,2013(1):71.
- [11]周秋菊.殷钢薄板材料激光焊接试验研究[D].大连:大连理工大学,2007.
- [12]张维哲.304不锈钢薄板激光焊接技术研究[D].大连:大连理工大学,2009.
- [13]Avery R E,Parsons D.Welding stainless and 9%nickel steel cryogenic vessels[J].Welding Journal-Including Welding Research Supplement,1995,74(11):45.
- [14]义一栗山,李标峰.用作液化天然气贮罐结构的5083-O铝镁合金的焊接[J].国外舰船技术:材料类,1984(10):34.
文章评论(Comment):
|
||||||||||||||||||
|